Skip to main navigation menu Skip to main content Skip to site footer

Vol. 3 No. 1-2 (2004)

Artykuły

The influence of the mass stream of drying medium on the spray drying process of malt wort concentrate

DOI: https://doi.org/10.24326/aspta.2004.1-2.9
Submitted: March 22, 2023
Published: 2004-12-31

Abstract

Experiments on drying of malt wort have been carried out in countercurrent laboratory spray drier APV ANHYDRO LAB1. The proces was conducted at the temperature of drying medium 137¸140oC, at concentration of raw material 30% dry substance. The final moisture content of dry product was 2.8–4.0%. The mean volumetric diameter of atomized of malt wort was 30.5 mm. The influence of stream of air on the value of moisture flux, dry product flux from unit volume of drying chamber, and thermal efficiency have been determined.

References

  1. Azzoprodi B. J., 1979. Measurement of drop sizes. Internat. J. Heat Mass Transfer 22, 245–1279. DOI: https://doi.org/10.1016/0017-9310(79)90215-1
  2. Bogdański K., 1966. Zarys technologii koncentratów żywnościowych, witaminowych i odżywek. PWN, Warszawa
  3. Filkova I, Cedik P., 1984. Nozzle Atomization in Spray Drying. Advances in Drying, Mujumdar A. S. (ed.). 3, Hemisphere, Washington, 181–214.
  4. Fraj A, Sąsiadek R., 1984. Produkcja i zastosowanie ekstraktu słodowego. Przegl. Piek. Cukier. 2, 11–12.
  5. Hiroyasu H., Kadota T., Arai M., 1980. Supplementary comments: Fuel spray characterization in diesel engines. Proceedings of the Symposium on Combustion Modeling in Reciprocating Engines. New York–London, Plenum Press. DOI: https://doi.org/10.1007/978-1-4899-5298-1_12
  6. Orzechowski Z., Prywer J., 1991. Rozpylanie cieczy, WNT, Warszawa.

Downloads

Download data is not yet available.

Similar Articles

1 2 3 4 > >> 

You may also start an advanced similarity search for this article.